PA Nylon Engineering Plastic Testing

Applicable materials: PA6, PA66, PA1010, PA12, fiberglass reinforced PA, mineral reinforced PA, toughened PA, flame retardant PA, weather resistant PA, heat-resistant modified PA and other polyamide engineering plastics.

Applicable products: injection molded and extruded products such as automotive components, electronic and electrical components, mechanical structural components, connectors, gears, bearings, cable ties, pipes, films, textile components, etc.

Applicable scenarios: raw material incoming inspection, formula development, type testing, factory inspection, certification testing, environmental reliability verification, quality arbitration.

Appearance: Particle color, uniformity, impurities, black spots, melt color difference; Appearance, deformation, cracks, and weld marks of the product.
Physical and chemical properties: density, ash content, moisture content, volatile matter, melt mass flow rate (MFR).
Tensile strength, elongation at break, flexural strength, flexural modulus.
Impact strength of simply supported beams/cantilever beams (at room temperature and low temperature).
Rockwell hardness, compressive strength, shear strength, fatigue performance.
Vicat softening temperature and heat deformation temperature HDT.
Melting temperature, glass transition temperature, thermal stability TGA.
Long term thermal oxidative aging and heat aging resistance.
Water absorption, dimensional stability after moisture absorption, and mechanical changes after moisture absorption.
Resistant to oil, chemical reagents, hydrolysis, coolant, and fuel.
Weather resistance, xenon lamp/UV aging, ozone aging, high and low temperature cycling.
Volume resistivity, surface resistivity, dielectric strength, and dielectric loss.
Leakage tracking index CTI, arc resistance.
Molding shrinkage rate, linear thermal expansion coefficient, dimensional stability.
Determination of flame retardancy (vertical combustion, oxygen index) and glass fiber content.
Wear resistance, friction coefficient, and wear amount.
Heavy metals RoHS, Polycyclic aromatic hydrocarbons, halogens.
Food contact migration, odor VOC